Aztech Labs MPU-401 Compatible Audio Driver

Aztech Labs MPU-401 Compatible Driver. The most important moment to install this card is using DOS-based application CONFIG.EXE from X \AT3000\UTILITY, which configures EEPROMed options, such as IRQ, I/O addresses & so on. You MUST start "SETUP" application even if you set up in Win'95 (it seems like Win16 app) from ZIP' root, 'cause WIN'95 drivers exists and maybe will install, but this board isn't P'n'P so you can change any settings only thru CONFIG.EXE Attention this utility won't work under any Win'95 windowed DOS session, only PURE DOS or Win'95 command prompt mode.

Hope this works - It did for me

This card was found in a Packard Bell system BTW